| |
 |
Activator
Acid Activator for Chlorine Dioxide Solution
KEEP OUT OF REACH OF CHILDREN
Directions for Use:
The Activator package is designed to activate SaniPure sodium chlorite
precursor for making chlorine
dioxide (ClO2) by adding all of the package contents to reactor sachet.
» Place sodium chlorite precursor pack and activator pack side
by side in ventilated work area near
water bath to be treated.
» Open precursor poly-pack and remove white reactor sachet.
Discard empty poly-pack.
» Open reactor sachet at zip lock opening. Be careful not to
spill contents.
» Open this activator pack and pour contents of activator pack
into reactor sachet.
» Reseal reactor sachet along the zip lock.
» Shake reactor sachet to mix ingredients.
» Place reactor sachet into water bath, with clear side facing
up.
» Keep activated reactor sachet in water bath until spent (2-5
days), then discard with normal trash.
HANDLING: DO NOT EAT, NEVER INHALE FUMES. Inhalation
of product vapors may cause
respiratory irritation. In case of skin or eye contact, flush well
with water for 15 minutes. Avoid ignition
sources, sunlight & heat. Store in a cool, dry location.
Hazard: Intended for solution applications only in
combination with SaniPure Sodium Chlorite
Precursor for Chlorine Dioxide Solution Pack. DO NOT use this product
alone. DO NOT add directly
to water. See material safety data sheets (MSDS) and product data
sheets for complete safety and use
information. Apply only as directed. |
|
Login Status
