pHlorSanTM Floor & Drain Sanitation
pHlorSanTM is the first and only large-scale liquid chlorine dioxide floor, wall and drain treatment service on the market, providing entire plant or large production area treatment. Using Pureline’s Pure3000 chlorine dioxide solution, the pHlorSan treatment has the capability to kill bacteria, bio-film and other biological contaminants causing sanitation challenges. The chlorine dioxide solution contact duration of the target areas is approximately 30 minutes.
The sanitization standard for nonfood contact surfaces is accepted as a reduction of 99.9% (3 logs) within 30 seconds. For chlorine dioxide solution, a 5-ppm solution is effective as a sanitizer with a contact time of at least 1 minute. Further, disinfection is achieved with 100 ppm using a contact time of 10 minutes. pHlorSan is often used in conjunction with a full-service MobileCleanTM or PureVistaTM treatment.
Pure 3000TM and Pure 100TM
Generated through our patented, NSF certified HP series generators, Pure 3000TM is 3000ppm 99.5% pure ClO2 solution. Pure 100TM is a 100ppm solution designed for direct application to floors and drains. Both are available from 5 gallon jugs to 275 gallon totes. Ideal for trials or low demand applications where a generator may be more than is needed. These products are pH neutral and are free of problematic reaction bi-products found in other ClO2 solutions. These products are Ideal for small cooling systems, legionella control, CIP applications as well as a host of other disinfection uses.
As with everything PureLine manufactures, safety is always a primary concern. Pure 3000 and Pure 100 are stabilized solutions that can be transported and utilized anywhere in the U.S. With available feed configurations, our containers feature Dry-Mate connections that make switching out containers easy and safe.
Pure Advantages
- 99.5% pure, pH neutral solution, free of reaction bi-products
- Easy to use and handle for trials and small volume applications
- Generated with NSF certified generator and pre-cursor
- Relatively short lead-times, reduced inventory requirements
Available In:
